Industrial applications
Process Flow – Dip-Spin Application L & LS
- Preheating of Parts in the Spin Basket
- Load clean, dust-free parts into the centrifuge basket
- Preheat to approx. 30–40 °C
- Improves wetting all surface area
- Dipping into Coating Suspension
- Immerse the parts dry and warm into the coating suspension
- Ensures optimal adhesion and even film formation
- Slow Rotation for Wetting
- Begin slow rotation, ideally bi-directional and slightly tilted
- Promotes uniform coverage and avoids air entrapment
- Draining & Minimizing Drag-Out
- Lift the basket out of the suspension and allow excess coating to drip off
- Optionally continue gentle, tilted rotation to reduce drag-out and streaking
- Spinning to Dry
- Spin at 50–70 °C and approx. 200 RPM
- Ideal: bi-directional spinning until parts appear visibly dry
- Evaporation in Holding Container
- Carefully transfer parts to a holding container
- Allow to evaporate before final packaging
- Avoid mechanical damage (e.g. due to excessive drop height)
- (Optional) Double or Multiple Coating Cycles
- Repeat steps 2–6 for additional layer buildup
